Sales

FAQ's

Assembling Root Feeder

Attaching G-10 Combination Garden Feeder to Root Feeder

Attaching G-10 Flex Hose Accessory

Fertilizer

Insecticide

Irrigation

Optional Water Meter

Parts

Troubleshooting G-10 Combination Garden Feeder

  1. The G-10 Feeder top came apart exposing all of the internal parts.
  2. The yellow plastic female hose swivel connector is broken or keeps coming off the G-10.
  3. Water leaks around the threads where the bottle screws onto the G-10 Feeder top.
  4. Water sometimes leaks around the seam between the top and bottom parts of the G-10.
  5. When I turn on the water faucet, some water leaks out of the two little slots between the yellow hose swivel connection and the water shut-off valve handle.
  6. When using a thick viscosity liquid product, the G-10 does not appear to draw the liquid out of the bottle as quickly as it should.
  7. When using a watering wand attached to the G-10, the G-10 leaks in several different areas.
  8. When using the Dry Setting, the G-10 does not draw the product out of the bottle, as the bottle remains full.
  9. When using the Dry Setting, the liquid and product draw out of the bottle very quickly.
  10. When using the Liquid Setting, the bottle appears to be getting fuller and does not draw liquid out.
  11. When using the Liquid Setting, the G-10 does not appear to draw liquid out of the bottle.
  12. When using the optional Water Watch Water Meter, the amount of product being dispensed does not appear to correspond with the setting on the dial.

Using G-10 Combination Garden Feeder

  1. Can I dispense liquid products at a rate higher than 1 oz/gallon?
  2. Can I dispense liquid products at a rate lower than 1 TSP/gallon?
  3. Can I use organic liquid products that have suspended particles in them?
  4. Can I use the G-10 with a lawn sprinkler?
  5. Can I use the G-10 with a watering wand?
  6. Can I use thick viscosity liquid products with the G-10 and will it dispense the correct amount shown on the dial?
  7. Do I need to use the Flex Hose Accessory when using the G-10 attached to the Root Feeder?
  8. How do I know how much fertilizer/water/product I am injecting into the ground?
  9. How much dry/water-soluble product do I need to put in the bottle?
  10. How much liquid product do I put in the bottle?
  11. If I want to use the optional Water Watch Meter, where do I install it?
  12. When using dry/water-soluble fertilizer, how do I know when it is time to refill the bottle?
  13. When using dry/water-soluble products, do I leave the straw/diptube in or do I take it out?
  14. When using dry/water-soluble products, how much product am I dispensing per gallon of water?
  15. When using liquid products, do I leave the straw/diptube in or do I take it out?
  16. When using liquid products, how do I know when it is time to refill the bottle?

Using Root Feeder

  1. Can I use the Root Feeder for annual flowers?
  2. Can I use the Root Feeder for perennials?
  3. Can I use the Root Feeder for vegetables?
  4. Can I use the Root Feeder for water-only applications?
  5. How deep do I insert the probe?
  6. How do I know how much water I am injecting in the ground?
  7. How long do I leave the water turned on for each insertion?
  8. How many insertions should I make around the plant?
  9. What do I do if the probe does not insert in the ground easily due to hard, dry soil?
  10. What do I do if water shoots up out of the ground around the probe?
  11. When using the Root Feeder for small to medium-sized shrubs, where do I insert the probe?
  12. When using the Root Feeder for trees, how do I know where the feeder roots are located?
  13. Where do I insert the probe around the plant?
  14. Which direction should the yellow arrow on the top handle be pointing while root feeding?

For parts call 740-373-1925 or email info@grocorltd.com

Grocor, LTD, 200 Putnam St., Suite 606, PO Box 644, Marietta, Ohio 45750

Phone 740-373-1925 | Fax 740-373-9500

Contact info@grocorltd.com